You are watching: Snap-on compression tester rev h
I simply tested the compression on my "05 800 Gade via WOT and also obtained Cold/Hot: PTO = 158/150 MAG = 155/155 The mag side cylinder was rebult at 2000 miles under warranty so that is the reason for the better numbers...however my greatest worry is my compression tester appears to begin at 15....is this normal? Can someone look at their tester and see wright here the needle starts? If this isn"t normal then can I assume that I have to subtract 15 off of my numbers? I additionally tested my bros rev and also got numbers above 150....Any opinions?
crank up the air comp and see what that gage has on it then hook up this one to watch what you gain for a reading, that is what i did and no the gage must check out zero
Dan PesonenIf it ain"t damaged, modify something till it is.....Frankensled originalFrankensled V2.05.5" truck box, 11.5" l sled, What"s the difficulty Officer? It fit"s excellent through the tailgate down!!!
How carry out I hook it as much as the air compressor? Are you saying to unscrew the gauge from my compressor and screw this right into it? If I am counting appropriate my guage is readin 15lbs...tright here is just one more tick before the 25lb tick.....so that would certainly suppose mine is on the 15lb mark...
See more: 4 X 6 Bulletin Board - Bulletin Boards From School Specialty
the needle can/did relocate on the article,,so as soon as you usage it,,facter it in,,or attempt an additional guagei checked my sled cold with a MAC devices comp guage,and also it visited 100psi in 1 pull then after 5 more it only went to 125 both,,,then hr later i used a SNAPON guage,and it started 35-40psi,first pull then 80,till it got to 155psi per side,,which i used that snappy guage last year/exact same reading/borrowed them from auto machineshop accross the street//the owner has actually the better guage