It’s been just about three years due to the fact that Smith & Wesson lugged out the second generation of its M&P pistols. These pistols sport improvements—inside and out—over the initial M&Ps, but until currently there was one thing missing from the second-generation lineup: a subcompact.

You are watching: Smith and wesson m&p9c for sale

The brand-new Smith & Wesson M&P M2.0 Subcompact is offered in 9mm and .40 S&W and with and also without a ignorance safety. The 9mm and .40 versions space identical yet for caliber and also capacity. Over there is additionally a .45, yet that pistol is bigger in every dimension. The .45 has a longer four-inch barrel, 8+1 capacity and also weighs 2.4 ounces more. Every variation of the Subcompact, no issue the caliber, is the exact same price.

I acquired a sample of the 9mm version with no thumb security for testing since it is most likely to it is in the most famous version. The Subcompact sporting activities a 3.675-inch barrel and also a 12-round volume in 9mm (10 rounds in .40).

Other than its abbreviated size, it uses all the exact same features discovered on the Compact and also full-size M&P pistols. These are polymer-frame, striker-fired pistols developed for rigorous use. Both the slide and barrel are stainless steel and also given an Armornite corrosion-resistant finish, and also the pistol is rated because that +P ammunition.

The steel three-dot sights are set in the exact same size dovetails as bigger M&Ps, therefore aftermarket sights the fit ahead M&Ps will fit the Subcompact.

Factory standard sights space steel with three dots, and the Subcompact has actually the very same dovetails as the larger M&Ps so all of the aftermarket sight alternatives like fiber optics and tritium will fit this pistol together well. The M&P has actually an 18-degree tight angle, i beg your pardon in layman’s terms method it’s lot closer come a 1911 than, say, a Glock. It come with 4 interchangeable backstraps.

With plenty of striker-fired pistols you’ll watch a safety bar on the trigger. Through the M&P the cause itself is the pivoting safety lever. Over there is an internal striker safety and security as well. Together I mentioned, girlfriend can also buy the Subcompact through a manual safety. That lever is ambidextrous and is located at the optimal rear that the frame, similar in position to wherein you’ll discover the thumb safety and security on a 1911.

The brand-new M2.0 Subcompact is readily available with or there is no a ignorance safety. Unequal first-generation M&Ps, the M2.0 dispenses with the beavertail.

This pistol comes with two 12-round magazines. One has a do the washing up base pad, the other prolonged base pad. V the extended base pad magazine in place, ns can gain my whole hand top top the gun, but when using the flush base pad, mine pinkie is left hanging. However, the flush base pad is half an customs shorter, making the total slightly easier to conceal. I say “slightly” due to the fact that it is typically the butt of the pistol that prints under clothing.

Before we dive deeper into the details that the pistol, let’s look at the changes and also improvements in between the first- and second-generation M&Ps. The two best have to resolve the cause pull and also the grip.

By far, the two many common types of customization excellent to first-generation M&P pistols have been cause jobs and also increasing the texturing of the grip area, usually v stippling.

First-generation M&Ps have actually an advertised 6.5-pound pull, which seems to be the standard create pull weight for pistols designed to be “service weapons,” as the M&P was. Heavy trigger pulls ~ above duty firearms are often meant to be an additional safety. The only difficulty with this is most human being buying M&Ps aren’t cops, and the American consumer is getting awfully picky when it comes to trigger pulls. Heavy cause pulls do it harder come shoot accurately, much less quickly, and also who desires that?

Smith & Wesson engineers took a lengthy look in ~ what to be being done to the first-generation M&Ps to boost the trigger pulls, and also so for the M&P M2.0 they reduced the create pull weight mainly through enhanced geometry in the sear and also striker. The target spec for the M2.0’s trigger pull is 5.5 pounds, and also that’s just what I acquired with my check gun. I’ve actually placed a most rounds downrange through miscellaneous sizes that M&P M2.0 pistols, and also every create pull has been within a quarter-pound of that 5.5-pound spec.

More 보다 the trigger-pull weight, what a lot of of world didn’t like around the trigger pull top top the initial M&P was the lack of a discernible reset. Reset shouldn’t issue in a defensive pistol. In any kind of self-defense scenario, nobody will be worried around the reset on your trigger; they’ll just be pulling that as fast as feasible until the problem is solved. Still, S&W engineers addressed the problem, and also the root cause on the M&P M2.0s have an extremely positive reset; you have the right to both hear and feel it.

Many world thought the manufacturing facility texturing on the fixed of the initial M&P was also slick. As a result, hand-stippling was a typical sight. Many thanks to contemporary injection-molding techniques, stippling your M&P M2.0 is no much longer necessary. The factory texturing on the frame and backstraps of the M&P M2.0 is together aggressive together stippling, and that is no exaggeration.

I’ve constantly carried the gun i shot in USPSA competition and also vice versa, and also for years i avoided stippled grips because I assumed the stippling would chew with my shirt. Finally, about 10 years back I acquired my very first stippled grip, and I will never go back.

I carry this increase because, as I said, the smith & Wesson structure texturing is as aggressive together hand-stippling, but just like stippling, you will certainly not need to worry about it wearing through your extending garment. However, I would recommend having actually some class of cloth (a slim T-shirt is all that’s necessary) in between your skin and also the framework of the pistol, or friend will suffer what medical professionals term a skin abrasion.

The first-generation M&Ps come with 3 sizes of interchangeable interchangeable backstraps: small, medium and also large. Follow to the persons at blacksmith & Wesson, 80 percent that users prefer the medium backstrap.

M&Ps have actually never been my first choice for a carry gun simply due to the fact that the pistol never ever fit my hand properly. The medium backstrap was just a little too tiny for me, and the large backstrap adds a little bit the meat ~ above the back, yet is mostly just fatter 보다 the medium, which i didn’t want. The closer a pistol grip is come round, the less naturally it points.

Apparently, i wasn’t the only human being who had this issue. The M&P 2.0 in every sizes comes supplied with not three however four backstraps: small, medium, medium-large and large.

One the the big improvements in the M2.0 is the consists of a 4th backstrap: a medium-large. The gun additionally comes v comes v two fixed extenders for larger mags.

The large news below is the medium-large backstrap, which has the very same girth together the medium yet adds a curve at the top to provide more material under the net of the shooter’s hand to rise reach to the trigger. On both the full-size and also Compact M&P M2.0, ns love-love-love the medium-large backstrap, yet I was surprised to discover that on the Subcompact the medium backstrap is a far better fit because that me.

That’s the good thing about having 4 sizes that backstraps. They allow you to fit the pistol to your hand as lot as possible. Swapping the end backstraps takes every one of 10 seconds.

Here is my just complaint around this details pistol. The M&P M2.0 uses the same proven magazines as the initial M&P. I’m guessing smith & Wesson has actually a many of extended base pads left end from the first-generation S&W M&P Subcompact, because the one detailed with this pistol walk not have actually that aggressive M2.0 texturing. The extended base pad feel a tiny slick under my pinkie.

One complaint I’ve heard about M&Ps because that a while is the ambidextrous slide stop. You’ll notice S&W doesn’t term that a “slide release,” because if you’re a southpaw and try to release the slide by pushing down on the right-side lever, fuhgeddaboutit. You’ll uncover it takes about four times as much pressure as pushing under on the left-side lever. You’re much better off just working the on slide by hand.

You might notification the lack of a beavertail ~ above the framework of the second-generation M&Ps. Smith & Wesson has eliminated the beavertail, so currently the behind of the framework doesn’t really stick out any farther 보다 the behind of the slide. On the full-size gun this makes less of a difference than on this subcompact pistol destined because that a concealed-carry role.

The scalloped serrations in ~ the behind of the slide haven’t changed, but with the M2.0 you’ll check out S&W has added some minimal serrations in ~ the prior of the slide near the bottom whereby it meets the frame. Ns wish S&W had been ready to relocate some that the slide markings to fully serrate the prior of the slide, yet at the very least the rear serrations room aggressive.

There are small cutouts at the bottom that the frame on each side to provide you a little much better grip top top the floorplate the the magazine need to you have to strip one the end by hand.

The internal steel chassis inside the polymer frame is much much longer on the M2.0 보다 on the original M&P. S&W calls the an “embedded strict stainless steel chassis,” and also it also has an Armornite coating. In the first-generation M&P the chassis didn’t extend much past the former of the create guard, however on the new model the steel in the framework goes many of the way out come the finish of the frame.

The interior stainless steel chassis extends nearly all the way to the front of the dust cover, making that stiffer and also therefore even more reliable.

On the initial M&P the serial number in the stole chassis could be seen v a window cut right into the polymer at the behind of the frame. In the M2.0 the serial number in the stole chassis is located above the tactical rail, intuitive proof the chassis extends lot farther.

This longer, stiffer frame makes much more of a distinction on the full-size M&P, ensuring over there won’t be any kind of flex if you cave a huge weapon irradiate on the frame’s tactical rail. Yet even with the Subcompact, less framework flex equals greater reliability.

The “loaded-chamber indicator” is merely a hole with the rear of the barrel hood. That is almost useless in anything other than straight sunlight, but it allows the M&P come be sold in states that mandate particular safety features on guns.

I was lucky enough to gain some serious trigger time through the M2.0 at the S&W Academy when the pistol was first introduced. In ~ the time, the editor of a significant gun newspaper remarked he assumed the brand-new gun should be referred to as the “M&P 1.1” since in his opinion over there weren’t many alters to it.

But I’ll counter that’s because not countless things necessary to be done to the M&P. Did ns mention any kind of changes S&W made come the design to improve reliability, which is the most important element of any type of defensive firearm? No. They didn’t make any type of because none needed to it is in made. That claims a lot.

Range time v the Subcompact brought no surprises. The fired everything I fed it and also was nicely accurate for a subcompact.

Notes: Accuracy outcomes are the averages of four five-shot groups at 25 yards from a sandbag rest. Velocities space averages that 10 shots measured v an Oehler version 35P 12 feet native the muzzle. Abbreviations: FMJ, complete metal jacket; JHP, jacketed hollowpoint

The M&P Subcompact is lot smaller than the full-size M&P, but it is not a pocket gun, and you will require a holster. The said, it will certainly fit into any kind of holster produced the first-generation M&P Subcompact and also conceal under just around any garment.

A an excellent review that this pistol wouldn’t be finish without a comparison to its closestly competitor: the M&P Shield. A lot of of people think among the factors why smith & Wesson to be so slow to introduce a subcompact variation of the M&P M2.0 is because of the success the the subcompact Shield. They could be right, yet these are much from similar guns.

The M&P Subcompact is the same elevation as the Shield, however it is roughly a half-inch longer, weighs a couple of ounces more, and is noticeably thicker. The Subcompact looks and feels like a chunk the a gun contrasted to the very flat Shield. However, the thickness doesn’t just offer a pretty personality; it offers you substantially an ext capacity than the Shield.

These pistols are the same height only if the Shield is wearing its do the washing up seven-round magazine. Meanwhile, the Subcompact supplies a 12-round capacity. Plus, you have the right to reload the Subcompact through those big sticks intended for the Compact and/or full-size M&P M2.0, which ups your capacity to 15 or 17 rounds. Last, the Subcompact has the 4 interchangeable backstraps, i m sorry the Shield go not.

If this sounds like I’m ganging increase on the Shield, i don’t typical to. The Shield is certainly easier to conceal and also carry 보다 the Subcompact, however that doesn’t come there is no a price. The great thing about the Subcompact is the if you’re a fan of the M&P design and also wanted a small, concealable pistol, friend now have one an ext option.

American consumers have actually had accessibility to compact 9mm pistols because that decades. Ns owned a blacksmith & Wesson 3913 back in the late ’90s, and the pistols these days are much superior to those firearms of yesteryear.

The smith & Wesson M&P M2.0 Subcompact is a perfect example. Castle have better ergonomics, vastly enhanced reliability, much better texturing top top the grips, much better sights, better everything. And also once you readjust for inflation, you’ll view that thanks to breakthroughs in manufacturing, they cost less, too.

See more: Ancient South American Ruler Sapa __: Ancient South American Ruler


TYPE: striker-fired semiauto CALIBER: 9mm Luger (tested), .40 S&W, .45 ACP (larger dimensions 보다 9mm, .40) CAPACITY: 12+1 BARREL LENGTH: 3.7 in. OAL/HEIGHT/WIDTH: 6.6/4.5/1.2 in. WEIGHT: 24.0 oz. CONSTRUCTION: Armornite-coated stainless stole slide, polymer structure TRIGGER: 5.5 lb. Traction (measured) SIGHTS: 3-dot stole SAFETIES: sear block drop, cause safety lever (as tested) PRICE: $569

Buy the now. log on to, choose this firearm, pay a deposit and also it will be at your neighborhood gun store in 2 days. As soon as purchased from, Davidson’s assures to repair or change this